Header Photo Philadelphia Tuckup

The previous header photo was of the reproduction Philadelphia tuckup, Marion Brewington, built by the Independence Seaport Museum. I lifted this photo from the Green Boats blog which unfortunately went dormant two years ago.

The Philadelphia hiker and tuckup were Americas first racing dinghies. Racing these catboats on the Delaware River was going full bore in the 1870s (which indicates that it was developing in the 1860s and maybe earlier) and continued to the early 1890s, when expanded commercialization of the Philadelphia waterfront shut down the tuckup yacht clubs and their boat houses. Following the lead of the sandbaggers, the unlimited hikers had ridiculous sail plans, carrying cat rigs up to 450 square feet. The  Marion Brewington is a fourth class tuckup which had reduced the sail area to a more sensible 177 sq. feet (but still on the overpowering side in modern terms), set on a gaff rig on a hull of 15 feet in length. The fourth class tuckups were normally crewed by two. The two hull lines of tuckups that have made it to the present day, the Thomas Seeds and the Spider, are both fourth class tuckups

Ben Fuller put together a very interesting history of the hiker and tuckups in issue #148 of Woodenboat, pages 46 through 53. Well worth a read if you can get hold of a copy.

The famous and somewhat controversial American painter, Thomas Eakins, painted the hikers in his well known Sailboats Racing on the Delaware (1874).

Read More..

We Are OFF! NY to Annapolis October 8 10 268 Miles

Our first problem was discovered when we had to use the dinghy to go to dinner on City Island because the Clubs launch service ends at 6 pm in the waning days of the season: it started right up but stopped in five seconds. So we paddled.  And the night of the seventh was unpleasantly rocky on the mooring due to strong SW winds kicking up big chop in Eastchester Bay, impeding sleep.

The passage was from 9:45 am on the eighth until 7:30 am on the tenth, 45.75 hours with a two hour "stop" to be discussed later, so 43.75 hours underway. The first of the two days (NYC and the Atlantic coast of New Jersey) was warmer than expected for the season, both day and night, with sunny clear skies and a big full moon; the second of the days (Delaware Bay, the C and D Canal and Chesapeake Bay) was raw and cloudy but not frigid and not rainy. This chart, created by Jims Spot device shows our route, except that it connects the dots every four hours or so and hence cuts off the corners and shows us crossing land. [Image to be added.]
We actually left, after mango pancakes, about an hour too early due to my impatience so we did not experience the favorable tide while we fought strong headwinds until near Hellsgate when the tide started flushing us out of NY Harbor. A tug with four barges (2 x 2) came up behind us near Hellsgate and called ILENE by name to advise that we would apparently be going through Hellsgate together and that his four barges would be swinging to port. I did a short 360 degree loop to let him pass and observed that his tow did indeed sweep far to his port side and "crab" through the most problematic tidal strait of the passage on a diagonal. We passed parallel to the FDR Drive with its snarled traffic on which I drive so often to get to the Club.

Here is the Freedom Tower to the left, currently New Yorks tallest structure, and a tower of the Brooklyn Bridge to the right, which held that title in the 1880s.

We put up sails, starting with double reefed main and small jib, after we passed Governors Island and we were on starboard tack all the way to Cape May, though we gradually shook out the reefs and changed back and forth to the genoa when passing through periods of apparent winds of 20-25 knots and periods where they were in the mid teens. The Verranzano Bridge, our ninth of the passage, was emotionally my last point in New York until around May, 2015.

Unlike the similar passage on Pandora about two weeks before, on which the wind was never forward of the beam, on this trip it was almost never aft of the beam, though rarely close hauled and predominantly about 60 degrees off the bow. 

Jim, who made the trip on both boats is a great man to have aboard. He is a fellow Cornellian, an engineer and very knowledgeable as a sailor though he wears his experts mantle lightly, without a trace of the arrogance that some experts have -- laid back and a pleasure to sail with. He agreed to my request to sleep the earlier part of each night and stand the later night watch.  During our first night I was "racing" a green light that started off our port bow. At times he would get ahead and by changing sails, at times, I would get ahead. Our speed varied from 3.5 to 8.1 knots depending on the wind. When very close I hailed the "sailboat with another sailboat on your port quarter", identified ILENE and thanked him "for keeping me awake last night". He reciprocated the thanks and identified himself as "Momo" a Valiant 40, here shown off  Wildwood,

bound for Florida with a planned stop for a day in Cape May harbor. I told him I hoped we would meet up with them in Florida or along the way. He is a very good sailor because ILENE is a faster boat but he kept up.

Jim took the watch for most of the passage up Delaware Bay, in which we avoided the worst of the adverse tide. Having rounded Cape May at about 9 a.m., using the inside passage a hundred yards off the beach, with main and engine but no headsail, Jim suggested a diagonal course, away from but toward the shipping channel at Miah Maull light, after which we stayed just outside the channel on its right side almost all the way up. A tug with barges ran near adjacent to us most of the way and we put up the headsail when possible to gain speed and sailed without engine, close reaching on port. Unfortunately, when the tug got ahead of us during lighter winds, we got long doses of his diesel fumes. About 5-10 miles before the Canal, when we are slightly ahead of him, I called on VHF and told him our plan to cut across his bow to get to the other side of the channel in anticipation of our left turn into the Canal and he replied "OK".

As we entered the canal Jim came up with the good idea to stop for a couple of hours to avoid the worst of the adverse tidal flow. We would tie up for free at a dock in the Summit North Marina on the north side of the Canal to have dinner in their excellent Aqua Sol Restaurant. And we shared a bottle of red and a nice assortment of appetizers while motoring in the canal. This is the same marina where ILENE spent a night on our last trip in June 2012 and where Pandora went in for fuel two weeks ago. But on our way in, going slowly, of course, we went aground. We used the preventer to swing the boom, with Jim sitting on its end, out to port, in an effort to tilt the boat and break us free. No luck, we were stuck hard. And we created this lead line, the old fashioned depth meter, out of a green divers weight, a wire wrap, a length of light line and red tape to mark where the wet part old the line ended.

Yep, we were stuck alright and it was mud, which you can see,  dried on the bottom of the weight. What to do? Wait for the tide to come in and float us off. I took the watch and two hours later, at about ten, I saw us drift, turned on the engine and woke Jim.  We motored to the inner end of the cul de sac, turned in the deep turning basin and headed out of there.  Then I slept for four hours until 2 a.m. while Jim took us out of the Canal and into the Bay.  I took the watch from 2 until 7:10 a.m., when GPS put us ten minutes from the red daymark guarding Back Bay harbor of Annapolis, where Jim lives with Ann and where we docked at Bert Jabins Marina -- where ILENE had stood on the hard during the winter of 2005 in which we bought her.
Ann came over to take us to breakfast at Grumps, an Annapolis breakfast institution, where no two coffee mugs ever match. But the Captain ordered another batch of pancakes and put Jim to work peeling mangos for the three of us.
Then how to best utilize the time before Lenes arrival at about 4 pm. Well the most critical task was fixing the outboard, the engine of our car. And it being Friday, when mechanics are at work, I searched and found Steve of A and B Yachtsmen, who disassembled the carburetor, cleaned the rust from it, and emptied our fuel tank and line. She runs again! We are across the dock from a beautiful Tayana 55, "Karina"

owned by Dr. Miles (both M.D. and a boat doctor) and Ann, who are leaders in the Caribbean 1500. Ann gave Ilene a lot of good advice about sailing with cats in 2010 and unfortunately their cat has gone to heaven. I introduced myself as a graduate of the 2010 run and he pretended to remember me and invited us to an Alumni reunion we attended that night.

Before that I washed Ilenes salt crust and New York grime and freshened our water supply, cleaned up the interior a bit and took a shower and a nap. Lene and Witty look happy to be here and we got a good nights sleep.

The adventure has begun!

Read More..

Fitting Out A Newly Built Boat

Fitting out a new boat can be difficult and very very expensive.I have known people to buy $20,000 boats and then drop another $50,000 to $60,000 on refits before they even touch water.Well my boat will cost around $3500 for the completed bare hull and cabin. See my post "Spira International 27 Foot Boat Plans Build Costs".Im looking at another $2,000 for paint,finish,and interior,and roughly $2,000 for powering the boat.So what about electronics.This is a difficult one to put a price on.The one system that you want to be all new is the waste,water, and plumbing system.This could give you tainted water,flood your boat, and/or make it stink like a sewer,if old equipment is used.Pumps maybe ok with a good cleaning,but tanks and piping need to be all new.

Understanding Boat Plumbing and Water Systems

First,how will the boat be used?For the first two or three years,the boat will be trailered to lakes and coastal areas.Eventually,it will be used to do "The Great Loop Cruise". Knowing how I will use the boat and when I may need to make upgrades helps a lot.I can resell my old equipment, when I upgrade, to recoup some cost.To do this, I will have to buy decent quality reliable products and maintain them in as new condition as possible.Ive rarely ever had problems taking care of things.

 The Great Circle Route

Second thing,the power plant.Jeff Spira,the designer of my boat, recommends an outboard for power.I have some issues that make outboards a bit of a challenge to use as a means of propulsion.My area has a strict ban on two stroke outboards.That leaves me trying to find a four stroke with controls and gauges.Four strokes are a relatively new thing and used set ups are still fetching top dollar.I cant afford to pay around $10,000 for a 90 horsepower four stroke outboard set up.After consulting with Jeff Spira,he has approved the use of a sterndrive.These are plentiful in my area and cheap,relatively speaking.A good complete four cylinder 140 horsepower 3.0L Mercruise set up goes for between $1500 and $3000.

Third thing,I have a plan to cut costs,get most of the stuff I need,and possibly make a little money back.I will buy a donor boat that is complete and running good.I can find sterndrive boats in good operating condition between $1000 and $6000.Some even have twin sterndrives.That would give me a few options.1)Sell the extra sterndrive set up. 2)Keep the extra sterndrive set up as a back up. 3)Clean up both sterndrive set ups,sell them,and buy a completely new set up.My choice would be the 140 horsepower diesel Volvo Penta D3-140 sterndrive set up.These are hard to find on the used market and most are damaged.New they start out around $12,000.A new 3.0L Mercruise sterndrive set up runs $6000 to $8000.On rare occasions,they can be had for around $5000 to $5500,but come with a catch.They must be set up by a factory Mercruise service center.

Stern Drive Manuals

The donor boat.This is tricky depending on location or region.Most boats here are bow riders or water sport boats.All tho,its not unusual to find cuddy or cabin cruisers for really good prices.Beware that a lot of boats are not properly maintained, and thats the reason they are for sell.Of course, one can get lucky at times and buy a boat that barely needs anything to be back on the water.Look for soft spots in the transom and floor.If they are soft then the stringers and flotation foam have been compromised,and the boats structure has been compromised.This is a good negotiating point.It is really expensive and labor intensive prospect to gut a hull for transom and stringer replacement.

What can be used from the donor boat?This depends on what boat is decided on to be the donor.When building a boat you need everything.

Heres what I look for in a donor.
Power Plant-must be running with all controls and gauges.
Electronics-VHF,depth sounder,radar,gps,etc... in operating conditon.
Pumps-Wash down,bilge,fresh water,black water,and grey water.
Electrical-Batteries,inverter,charger,genset,breaker panel,fuse panel,switches.
Windows-I plan to build my own to fit my boats design.
Bimini Top and canvas-It wont fit the boat,but it can be modified and save some money.Resell is an option.
Interior-Its hard to reuse interiors but they can be modified to work.
Thru Hulls-Pure preference,but I want bronze if theyre under water,and stainless steel above water.Plastic ones crack and fail.
Anchor,Rode,Bow Pulpit,and Windlass-These can usually be modified to work.
Heads(Toilet)-These things are a pain,save yourself the headache,buy new.
Sinks,Faucets,Showers-If these are in good condition,I will use them.I prefer stainless steel.
Tanks and Plumbing-All new.This was discussed earlier in this post.
Cabinets-These can be modified to work.
Hatches and Vents-These can usually be reused as is.
Swim Platforms and Ladders-Modified they can work.New they are outrageously priced.
Air condition unit(s)-These can be reused without much change.Good insulation can help keep the cool in.
Heaters-These can be reused without much change.


There is other items that can be reused but this is the most common expensive items.Anything that isnt used can fetch good money on Ebay or Craigs list.

RVs,motor homes,travel trailers can provide some good stuff also.I wouldnt use parts from them on a full time cruiser.A weekend cruiser should be fine.However,nothing will be USCG or AYBC approved.

Boat Systems Handbook

Read More..

Trawler Fest Rivera Beach FL

Once again I am happy to announce I will be part of the boat buyers program at Trawler Fest in Rivera Beach, FL. http://www.passagemaker.com/events/trawlerfest-riviera-beach-2016/

I am looking forward to teaming up with yacht designer Stephen Seaton  on a seminar about buying and building custom yachts. We will cover what you will need to know about having a custom boat designed and built. We will also cover the purchasing of a used custom boat, most of which are one off built boats. We will mostly cover metal which is the most common in custom built trawler materials, but will also touch on wood and fiberglass.

Read More..

More Aluminum Sailing Dinghies

In response to my post about the aluminum Gouget Moth, several readers sent in some aluminum sailing dinghies they have come across.

Australian "R.L". sent two photos of a welded aluminum version of the Australian 11 Aquanaut Dinghy, masterfully crafted.

Mike Scott owned a prototype De Havilland 12 aluminum dinghy during his time in Australia. His story:

"Im not sure who designed that alum dinghy I had, could well have been built as a prototype for the Vagabond, and therefore designed by Alan Payne. They maybe figured that alum was not the best way to go and so built the 3 class boats in glass. The 16ft Corsair is still going strong all over Oz, but the 12ft Vagabond and 10ft Gipsy seem to have faded. When I worked at Miller and Whitworth (Bob Miller and Craig Whitworth, sailmakers, Flying Dutchmen champs, and of course the legendary Bob Miller (aka Ben Lexcen). They became the agents for the 3 classes, and we would place an advertisement in the local paper for Free Sailboat rides, and we would take out prospective customers and then try to sell them a boat....was a fun job, but didnt get to see my kids much....that was 1966. Check out De Havilland Marine. I also worked there - that was where this boat came from. I bought it for scrap value, one of the perks of the job, I guess. In those days I was an accountant - ha...!

In the U.S, Grumman remains the most famous firm for their line of aluminum small boats and canoes but their most enduring aluminum sailboat is their dink, much sought after by the cruising crowd.

Tom Price pointed out that Grumman, in the late 1960s, built a 15 racing dinghy, called the "Flyer." Tom came across it at a Baltimore Boat Show. It doesnt appear many were made as this is the only image I could dig up about this dinghy on the InterWebs.

And finally, the aluminum sailboat I came across at Bobby Mullers yard? After digging around it appears it was the Pelican class, a 12 footer design by Philip Rhodes, of which over a thousand were built by the Aluminum Company of Canada - Alcan. More info about the Pelican can be found at this blog post here.

A nice roomy 12 footer.

A video walk-around of a Pelican.

Read More..

December 25 31 Final Work Day and 2015 ROUNDUP A Great Year!

I had planned on more than one final work day before the end of the year, what with such good warm weather so late this year but a wrenched back put the end to that. The last work day was devoted to the cabin sole. I want to check out how good the pieces I have done look, before committing to do the rest. I have been doing the bottom side of this flooring to encapsulate the wood in plastic to avoid a softer surface on which mildew could potentially grow, not that mildew has been a problem for ILENE.

Another non-boat day for calling Dave to make an appointment for January to work with me on cleaning and lubricating the winches and steering gear and fixing some pesky wires that no longer transmit sound to the cockpit speakers, etc. And then I had to figure out what parts and supplies I need for these jobs which involves a lot of calling and computer searching before ordering. But the non-boat water relatedday involved some play too: While my two favorite ladies, ILENE the boat and Lene, her mate, are thoroughly land locked on the hard in New York in late December, I had fun with Dames at Sea:

And while laid up resting the lumbar-sacral region I have been reading this months selection of my book group (all right, it was my suggestion): Jules Vernes "20,000 Leagues Under The Sea". So avid readers may expect another book report soon.

So what can I say about 2015. I sure got a grand dose of sailing and boating related activities - a lot of water under our keel. It was a very satisfying year, the year that my beloved Lene finally lost her ability to continue to claim "Im really not a sailor.".
We began the year in Fort Lauderdale, Florida, to which we returned on March 5, after a lovely multi-stop visit to Key West Florida and 20 miles past that. Next were a lot of great passages and ports until we got back to the Harlem on May 26, the 146th day of this calendar year. Also: a two day trip down to Gravesend Bay to sail with LHermione, 17 days on the Club Cruise to Block Island, five days with Bob on s/v Pandora from The Connecticut River around Montauk Point to Hampton Virginia and 22 additional days of day sailing from our mooring and back for a total of 190 sailing or living days. My career high total, and possibly a number that what with aging, may never be equaled or exceeded. And as they say in the infomercials: "But wait, theres more! Add on 21 days involving the water that are not related to living, sailing or working on a sailboat, and 25 work days on ILENE. (Or course, many of the cruising or living days also involved some boat maintenance and repair, but those are not counted as lowly work days.) So the grand total this year was 236! A goodly percentage of the 365 available. I have nothing to complain about.

The way I have looked at it, sailing is a social activity with much of the fun coming from sailing on other peoples boats and inviting them onto ours. Most of the sailing days, including the first 146, were aboard ILENE. But 5 were on Pandora, 4 on Deuce of Hearts, 2 on Ohana and 1 on Pas de Deux, totaling 12 -- 178 out of the 190 were aboard ILENE.

Continuing my lifelong desire to share my boat with present and future friends, a total of 38 different people in addition to Lene sailed with me on ILENE, at least once day this year. Some sailed multiple times and others, not counted among the 38, did not sail, but came aboard for meals. Friends of mine, of Lene, from the Yacht Club, from our Synagogue, and from our condo.

And 2016, with a three month cruise to Nova Scotia as a goal, starts in a few hours. Before Nova Scotia comes after both a week with Bennett and Harriet (in whose home we will celebrate the New Years arrival) on s/v On Eagles Wings in the Virgins in early April and a week with Lenes family on a cruise liner from Galveston Texas in the Gulf of Mexico in early June.

On the macro level, the world may be going to hell in a hand basket with democracy threatened by big money at home, climate change destroying the world, gun nuts (both domestic and foreign) running amuck, a certain redheaded egomaniacal reality show star trying to move us from love toward hate, educational standards low and sliding, etc. But all I can say is that focusing in on the micro level I am blessed to have such a great life. And I recognize and am very grateful for the bounty bestowed upon me and my family.

Read More..

Seen at the 2014 Sailboat Show Part 3 the Zim 15

One of the hidden casualties in the ongoing clash between Laser Performance Europes business strategy and the rest of the small boat sailing world has been the virtual stoppage of production of the Vanguard 15, a two-hander racing and recreational dinghy that, since the late 1990s, has sold well in the United States and still has a national presence. As with any vacuum in the market someone will step in and in this case Steve Clark, one of the original team that developed the Vanguard 15, has linked up with Zim boatbuilders to produce his higher-end version of a hiking doublehander, the Zim 15.

Zim Sailing freely admits they are targeting the post-collegiate market with the Zim 15 and it comes with a bunch of modern performance features, albeit at a higher selling price compared to the Vanguard 15. What modern features do you get?

• A hull designed for higher speeds.
• Carbon spars.
• High aspect ratio blades.
• Roachy Mylar sails.
• Gnav vang to clear up the forward end of the cockpit.
• A multi-purchase rig-tensioning system run through the forestay.
• A bow stem made of high-impact plastic.
• A dangly whisker pole.
• A flow-through double bottom cockpit with open transom.
• Enough cleats in the right positions to make adjustments easier.

Some photos.

Here is the bow bumper which is cleverly molded in during construction so as to be an integral part of the hull.

The Zim 15 has a centerboard for easier launching but the centerboard trunk has grooves in each side so the board can be pulled up and "reefed" in a breeze, just as you would with a daggerboard.

The dangly whisker pole is not seen in the U.S much but is very popular in the U.K. non-spinnaker classes. It resides on the front of the mast when going upwind. To deploy, pull the dangly pole down with its control line. To retract. uncleat the control line and a shock cord returns it to the front of the mast. There is also the multi-purchase forestay tensioner sitting on the foredeck in front of the mast.

The flow-thru double-bottom cockpit with the nifty tilt-up rudder. The hull sports soft-chines as it was also designed for team racing.

The business end of the cockpit. We can see the Gnav vang on top of the boom, the dangly pole, recessed cleats in the wide thwart and plenty of adjustments at the base of the mast.

A computer-rendered sideview of the Zim 15 (lifted from Zim Sailings website).

Read More..

Header Photo The Tempo Scow

The previous header photo was of the Tempo scow designed by Jack Koper of South Africa in the early 1960s. He did three home-built scow designs, all extremely popular in South Africa. The Tempo made it into the northern hemisphere, becoming popular in Germany and Holland and in a twist, the Tempo, in modern times, is now only found in these two countries and not in the home of origin, South Africa.  The Fireball was introduced around the same time as the Tempo scow and sits in the same space, a 4.88 meter, two man, single trapeze, spinnaker performance dinghy capable of being home built. The Fireball became an international class, the Tempo is bumping along close to extinction.

Amazingly, last year, I came across a forlorn, rotting Tempo sitting around the back of Bacon and Associates (the Annapolis firm that is the top broker of used sailboat sails, fittings, and other sailing paraphernalia in the U.S.); a Tempo that was home-built in Maryland in the 1970s. Unfortunately this Tempo was too far gone but if it retained a good proportion of her plywood in decent shape I would have finagled slotting this Tempo amongst my bevy of Classic Moths. (Yes, my dear, that is one of my Classic Moths, the length just appears as an optical illusion!)

I hope the Tempo sticks around. It is a true scow whereas the Fireball is more of an unique transom bowed, flat rocker panel, multi-chine dinghy. The Fireball, with its high level of competition, no longer sees a home-built wooden dinghy among the top finishers in a major regatta. It would be nice to see a two man, single trapeze class where a wooden boat still has a chance. It would also be great to see the Tempo plans available as an Internet download. Earwigoagin would offer the services of this blog if someone wants to send the blogmeister a copy of the Tempo plans.

Photos of the Tempo scow that I have culled from the Internet:

A wooden home-built Tempo sitting in front of a fiberglass Tempo. The roundish gunwhale shape was carved out of a solid piece of wood.

The history of the Tempo scow.

Read More..

January 11 15 Five More Lay Days in Coconut Grove 1 5 Miles

We spent four nights at a dock of the Coral Reef YC, after one more rough night on anchor in the John Brennan Channel way off from the Dinner Key Marina. We did not even go ashore the day after the botanical garden trip, because it was so rough. This Google Earth picture shows both locations and the route between them, which is not charted, in the northern half of its brief 1.5 miles. (The dinghy dock is clearly visible in the extreme lower left and the well marked Dinner Key Channel -- through which we entered and will leave -- runs in from below the yellow humanoid figure in the upper right, slightly downward to the left, between two islands. The chart does not indicate and I am not sure which of the islands shown is actually Dinner Key.)

 The white dots, right side lower central are moored boats. They are rather orderly, like grave stones, because mooring fields are generally laid out in an orderly manner. We were anchored to the right of them, off the picture, in the anchorage area, where such orderliness does not exist. Our first anchoring attempt (not enough water) was among the white dots at the extreme lower right corner. The dark blue between these two fields of dots is the John Brennan Channel. To got to the Coral Reef YC we motored (1) to the  left through that well marked channel, (2) south of the lower end of the berm that runs sort of vertically past the end of the seven docks of the Dinner Key YC, (3) turned left to pass between the ends of those docks and the island running to the upper right, and (4) hugging the ends of the smaller docks, toward the upper left where we (5)entered and tied on, facing the shore, between the two shoreward docks extending downward from the "E" shaped dock in the extreme upper left.
 After bringing ILENE to the dock we went to the movies seeing Big Eyes (about an female artist who painted children with emotive big eyes and her emotionally abusive husband) and Inherent Vice (which provided a vehicle for actors to act as trashy people doing trashy things which signified nothing and was a waste of time). And we stopped at Fresh Market for take out food to eat at home, i.e., aboard.
We learned the local mass transit system and used it to visit local cultural attractions. This included the rather new, large and very elegant Perez Art Museum of Miami (PAMM).
The 249 bus took us from two blocks from the YC, about a mile, to the Coconut Grove light rail elevated system station which in turn took us to the People Mover, a free elevated loop in the central downtown area, which left us a block from the museum, of which the Miamians are quite proud, having spent $200 million on its construction in prime real estate next to the new concert hall and the new science museum under construction.

Lene hooked up with the same Rhonda who we had dined with on our first night in Miami Beach and three other women. She viewed the art and had lunch with them. I explored the art myself. It rained a lot early in the day but we had our foulies and did not get very wet. Most of the artists were not known to me and most had some Miami or south Florida connection by birth, education, work, residence or death.They had a large collection of pop art, by name brand artists: Warhol, Lichtenstein, etc. which Lene liked. This seemed old to me. These two works, one inside and one out, are based on geodesic domes.

My favorite was this painting, approximately 5 by 8 feet by my guess, by an African artist. Three zig zag lines, two starting in the upper right and one from the top toward the left define the spaces that are painted in. And the bottom represents more, little triangles that I saw as water in this landscape, though the plackard said it could be a TV static pattern. I spent quite a few minutes intrigued by this one.

Another day we visited Viscaya, the seaside mansion of John Deering of John Deere fame, another Breakers-like home of the rich. This one was built during the portion of WWI before the US went "over there" to end it. Deering was a bachelor and imported fountains and whole rooms of walls and furniture from Europe. Quite lovely actually. The big change here in the last century was the erection of a glass roof to cover and hence seal off the central courtyard onto which all rooms of all three floors open -- to keep out the salt air and rain. This, of course, also necessitated air conditioning. And the gardens are not what they once were. I love these marble floors of theseaside and land entryways:

The gardens are nothing to sneeze at either, and here is one of the fountains with "merboys"  --mermaids with boys instead of girls.

A large stone Venetian barge (a place for guests to recline at ease) was built on a sandbank to protect Vizcayas sea entrance, with me at the extreme left and the towers over Government Cut barely visible on the horizon in the between. A bird walked by unconcerned with his proximity to humans.

One evening some young men strolled past our boat and started up a conversation because they recognized ILENE. Russ and Tom had sailed with my late son-in-law, Julien, and sung his praises and those of my daughter who they asked me to convey their good wishes. Small world.
We spent a pleasant afternoon lounging at the YCs underutilized swimming pool and, after some wine aboard, had a nice dinner at the Yacht Club with Jerry and Louise, who came over from Miami Beach and took us to Publix afterwards so Lene could get some products that the very nearby Fresh Foods does not stock, e.g. frozen blueberries and sugarless peanut butter. We lucked out that this was an all you can eat pasta plus night for only $17.00.  I have yet to learn how to avoid over stuffing myself at such affairs, though. The eighteen percent service charge is added to the bill automatically. This club has lots of helpful friendly staff to serve its 800 members, most of who do not keep boats here. It has fixed concrete piers against which we put up the fender board. The docks are busy by day with contractors and many people in suits apparently use the club day and night as a venue to do business. The only drawback is that on sunny days numerous black birds sit in the rigging and emit the remains of their fruit based diet, staining the deck. I washed it off over and over and will use bleach on the remaining stubborn though by now faint stains.
Another evening we were visited by Janet (who had taken us to the Chihuly exhibit) and another member of Lenes grade school posse, also named Rhonda. Rhonda was in town from New York to visit her Mom. After wine and cheese and a tour of the boat, I had, among other things, a single stone crab leg, my first, a delicacy here, and not as good as other seafood to my taste. This was at the well known but not excessively expensive (except for stone crab legs) Montes, on the water, less than a quarter mile away. Photo to be added. Janet and ?Ed may drive down to Marathon to visit us there, and perhaps to fish, though access to the boat on anchor or mooring will be more difficult for Janet than dockside. Also, yesterdays news about Cuba has started us thinking about getting the charts and cruising guides we will need for such a visit, though our insurer, Pantaenius, has not yet come around on this issue. They have several weeks to do so. Life is very very good.

Read More..

Rhode River to Cambridge and Three Lay Days in Cambridge October 13 17 38 7 Miles

First the passage: The wind was predicted at 5 knots, building to 15, in our face. Not pleasant, but manageable. It came from the predicted direction, a bit east of south, but at  20 to 25 knots and one has to add five to that to account for our boats speed into it!  And with Chesapeake Bay running generally north-south, the wind had time to work up large stiff waves of up to five feet. ILENE was pitching in these waves, some of them breaking over her bow, throwing spray back onto us. And with both these waves and the wind pushing us backwards, we were making only about four knots over the ground -- making for a long day to cover the 34 miles involved.

What to do. We changed course by 35 degrees, with the engine still working at its high speed for continuous use, 2500 rpms, and put out the small jib. Now less pitching, speed up to over six knots and a whole lot of heeling. The Saga owners network is having a discussion of the merits of adding  a ton of extra lead at the bottom of the keel (a sole under the keels foot as it were) and with Lene reporting this was on her "ten worst passages" list, I think the time has finally come to bite the financial bullet and do this -- next winter, when the boat is hauled. I thought of taking photos for you, or video, which could have shown the excitement, but decided to keep the salt water off the iPad, which was in a ziplock bag.

Turning a bit east, into the Choptank River, the wind was 60 to 80 degrees off the starboard bow and our speed was over seven knots with the throttle turned way down.  But this wide but shallow river twists and turns and when we came to a point where tacking in the channel would have been required we elected to furl the small sail and motor the rest of the way.  The trip took seven hours, from 11 to 6.

The landing at a dock in the Cambridge YC was very poor due to Captain Roger forgetting an important rule: always check the wind direction when attempting a landing at a dock. Maybe I was tired -- a reason but not an excuse. Anyway, the wind blew us onto the dock. We should have aimed further away from the dock, stopped and let the wind blow us to the Tee dock. Instead, with some way still on, we crashed our starboard quarter with the dinghy, hanging from its davits athwart the stern and protruding a few inches out past the side of the boat on each side, catching the dinks bow on one of the pilings that support the fixed height dock.  The painter, which is one of three lines used to snug the dinghy to the boat, parted (here reattached and a foot shorter),

and one of the welded aluminum





 padeyes holding up the bow ripped open.

But we landed and enjoyed three days at the YC, though the first of them was rainy.



On the sunny days that followed we enjoyed this view from ILENE of a replica of a screwpile lighthouse at the adjacent marina. I visited our friend, Johns meticulously maintained 28 foot S2, "Hearts Content" there.

 John, a former New Yorker and Harlemite was the best host one could find and our reason for staying in Cambridge. He has many talents in boating and as a mechanic, and he has a whole lot of power tools and the knowledge of how to use them. He rebuilt the interiors of the Plaza hotel and Columbia Universitys Butler Library as well as working for 15 years in NY theater, both on the stage and behind it. A gentleman and a pleasure to be with who put himself at our service. 

He drove us all around the town (population 12,250) showing us where everything was, took us to the post office to mail time sensitive mail, to the hardware store where we got a stainless steel padeye, bolts split washers, to the supermarket, several times, for provisions, to his home where we hacked off the extra length of the 1/2" bolts of the padeye and chamfered the edges, did our laundry and printed out a letter that was on our computer. He lent us one of his cars. He came to the boat and "helped" (lets just say he did the jobs with me as helper/learner/doer of the easy parts). He ground off the remnants of the old aluminum padeye, drilled the 1/2 inch holes for the new bolts

and we attached the new stainless padeye -- stronger than before!

We also replaced the old carburetor with the new one which had been fedexed to his house and he showed me how to adjust the idle and it works again!








We spent our days here with John and actually stayed the fourth night, when it was much calmer, at the wall of the town basin, rent free.

For our stay in the basin, he suggested the creation of the fender board, shown here, which uses two fenders and a hanging board to keep the pilings from harming the boat.

We watched Johns TV. He took us to his favorite restaurants and bar, Leaky Petes, where we had Natty Bos (National Bohemian beer). We tried scrapple, and crab, oyster and fish.









Cambridge is a very sleepy town, which has seen better times, especially its downtown district, which was devastated by suburban stores, fires, the recession and greed. We toured its Arts Center, and visited its Maritime Museum

and the Harriet Tubman Museum, but  the last two were closed.

Here are the kitties exploring a neighboring boat at the YC; maybe they smelled fish.

And I just loved this one, which I call "Still Life with Boat".

On our last day John took us on a long car ride to the southernmost of the three Hoopers Islands, connected by road and only a few feet above sea level, and populated mostly by watermen (crab and oyster harvesters) and their families. These islands were reached after driving through the Blackwater Wildlife Preserve, a huge swampy expanse.  We had lunch at Old Saltys

which has this wonderful view of mainland Maryland, the thin line at the horizon, across the Bay,

where we will be going next. John and I are planning the next leg of the cruise, I wish we could have persuaded him to come along for a few days.

Read More..